The PTFE sleeve serves as the seat for the valve plug thus eliminating contact of two metal surfaces. Turning effort is low and galling is avoided. The design also permits the use of any body/plug material combination. Positive shut-off is ensured and the valves are free from regular maintenance.
Provider
Galli & Cassina| Type | Plug Valves |
| Body Material | Stainless Steel , Carbon Steel |
| Media | Fertilizers/Urea , Salt Water , Sulphuric Acids |
| DN/NPS/NB(Metric) | Min: 0.5 inch ( 15 mm ) Max: 20 inch ( 500 mm ) |
| Temperature | Min: -29 C ( -20 F ) Max: 816 C ( 1,501 F ) |
| Pressure | Min: 1 Bar ( 15 psi ) Max: 155 Bar ( 2,248 psi ) |
| ANSI / ASME Ratings | 400 , 900 , 600 , 300 , 250 , 150 |
| Design Standards | ANSI , API , ASME |
| Actuation Method | Electric , Hydraulic , Manual , Pneumatic |
| Applications | Chemicals , Desalination , Fertilizer , Refining |
| Country | Italy |
Production Range:
API6D ASME/ANSI 150 up to 900 Lb Available in SHORT, VENTURI, REGULAR or FULL BORE Pattern.
DN 1/2” to 20” Class: 150-300
DN 1/2” to 16” Class: 600
DN 1/2” to 8” Class: 900
Operator:
Manual Gear or Wrench Operated; Electric Actuator, Pneumatic/Hydraulic actuator single or double acting; Gas Over Oil; Electro Hydraulic
